The LM137 series are adjustable 3-terminal negative voltage regulators capable of supplying in excess -1.5A over a -1.2 to -37V output voltage range.They are exceptionally easy to use and require only two external resistors to set the output voltage. Further, both line and load regulation are better than standard fixed regulators.

Формат: PDF
Размер: 1.52 Mb
Скачать: narod.ru

Devices Included in this Data Sheet: PIC16F873 •PIC16F874 •PIC16F876 •PIC16F877
Microcontroller Core Features: •High-performance RISC CPU •Only 35 single word instructions to learn •All single cycle instructions except for program branches which are two cycle •Operating speed:DC - 20 MHz clock input DC - 200 ns instruction cycle •Up to 8K x 14 words of FLASH Program Memory, Up to 368 x 8 bytes of Data Memory (RAM) Up to 256 x 8 bytes of EEPROM data memory •

Формат: PDF
Размер: 3.46 Mb
Скачать: narod.ru

Transient Voltage Suppressor Diodes 1.5KE6.8 - 1.5KE440CA series (WTE)

Формат: PDF
Размер: 60 Kb

TRANSIL 1.5KE6V8A - 1.5KE440CA series (ST)

Формат: PDF
Размер: 205 Kb

1.5KE6.8A - 1.5KE550CA (RoHS) 1500 Watt Axial Leaded Transient Voltage Suppressors

Формат: PDF
Размер: 123 Kb

1500 WATT AXIAL TRANSIENT VOLTAGE SUPPRESSORS 1.5KE6.8 - 1.5KE440CA series

Формат: PDF
Размер: 93 Kb

Transient Voltage Suppressor Diodes 1.5KE SERIES 1.5KE6.8 - 1.5KE440A series (TSC)

Формат: PDF
Размер: 110 Kb

1N5333B thru 1N5388B Silicon 5 Watt Zener Diodes

Формат: PDF
Размер: 215 Kb

UAA170 IC for driving 16 light emitting diodes

Формат: PDF
Размер: 131 Kb

The NCP101X series integrates a fixed−frequency current−mode controller and a 700 V MOSFET. Housed in a PDIP−7, PDIP−7 Gull Wing, or SOT−223 package, the NCP101X offers everything needed to build a rugged and low−cost power supply, including soft−start, frequency jittering, short−circuit protection, skip−cycle, a maximum peak current setpoint and a Dynamic Self−Supply (no need for an auxiliary winding).

Формат: PDF
Размер: 323 Kb

The LM1458/LM1458C series are dual general purpose operational amplifiers, having short circuits protected and require no external components for frequency compensation. High common mode voltage range and absence of "latch up" make the LM1458 ideal for use as voltage followers. The high gain and wide range of operating voltage provides superior performance in integrator, summing amplifier and general feedback applications.

Формат: PDF
Размер: 63 Kb

HA12163 series are silicon monolithic bipolar IC providing Dolby noise
reduction system*, music sensor and PB equalizer system in one chip.

Формат: PDF
Размер: 578 Kb

The APL1117 is a low dropout three-terminal adjustable regulators with 1A output current capability. In order to obtain lower dropout voltage and faster transient response, which is critical for low voltage applications , the APL1117 has been optimized. The device is available in an adjustable version and fixed output voltages of 1.8V, 2.5V, 2.85V and 3.3V.
Rev. B.8 - Jun., 2003

Формат: PDF
Размер: 156 Kb

HA17904 and HA17358 are dual operational amplifiers which, provide internal phase compensation an
high gain, and mono power source operation is possible. It can be widely applied to control equipment an
to general use.

Формат: PDF
Размер: 36 Kb

HMJE13003 NPN Planar Transistor Hight Voltage

Формат: PDF
Размер: 39 Kb 

LM139,A - LM239,A - LM339,A LOW POWER QUAD VOLTAGE COMPARATORS These devices consist of four independent precision voltage comparators with an offset voltage specifications as low as 2mV max for LM339A, LM239A and LM139A. All these comparators were designed specifically to operate from a single power supply aver a wide range of voltages. Operation from split power supplies is also possible.

Формат:PDF
Размер: 163 Kb

LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902 QUADRUPLE OPERATIONAL AMPLIFIERS These devices consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies also is possible when the difference between the two supplies is 3 V to 30 V (for the LM2902, 3 V to 26 V) and VCC is at least 1.5 V more positive than the input common-mode voltage. The low supply-current drain is independent of the magnitude of the supply voltage.

Формат: PDF
Размер: 121 Kb